Characteristics
 |
Used for gaseous media |
 |
Chemically resistant |
 |
Temperature resistance -70°C up to +260°C |
 |
Flexibility ★★★★★
|
 |
Axially compressible 1:7 |
 |
Standard length: 10m Packing system for standard e-shop orders: DN 80÷180mm - 1pc = up to 10m DN 181÷1150mm - 1pc = up to 5m (for longer than 5m units, contact us for a special transport offer) Example: if ordered 12m of DN 100mm and 8m of DN 300mm - standardly you recieve 10m+2m of DN 100mm and 5m+3m of DN 300mm. If you need different lenghts (for example 6+6m DN 100mm and 4+4m DN 300mm) note it in the order notes. Note! When ordering a quantity other than the standard length, it is not possible to return the goods. |
Technical parameters
| Application |
exhaust of hot air and gases extraction of aggressive chemical fumes and vapors for work at elevated temperatures for transmission of hydrolysis media in ventilation and exhaust systems |
| Wall material | Fiberglass fabric both-sided coated with PTFE |
| Instructions for using hoses |
Parameters of all produced diameters
| Product catalog | Inner diameter [mm] | Outer diameter [mm] | Bending radius [mm] | Approx. weight [kg/m] | Vacuum [bar] |
| 3 - 10 - 0100 | 100 | 112 | 63 | 0,5 | 0,08 |
| 3 - 10 - 0110 | 110 | 122 | 69 | 0,5 | 0,06 |
| 3 - 10 - 0115 | 115 | 127 | 73 | 0,6 | 0,05 |
| 3 - 10 - 0120 | 120 | 132 | 76 | 0,6 | 0,05 |
| 3 - 10 - 0125 | 125 | 137 | 79 | 0,6 | 0,04 |
| 3 - 10 - 0130 | 130 | 142 | 82 | 0,6 | 0,04 |
| 3 - 10 - 0140 | 140 | 152 | 88 | 0,7 | 0,04 |
| 3 - 10 - 0150 | 150 | 162 | 95 | 0,7 | 0,03 |
| 3 - 10 - 0160 | 160 | 172 | 101 | 0,8 | 0,03 |
| 3 - 10 - 0165 | 165 | 177 | 104 | 0,8 | 0,03 |
| 3 - 10 - 0175 | 175 | 187 | 109 | 0,8 | 0,03 |
| 3 - 10 - 0180 | 180 | 192 | 113 | 0,9 | 0,03 |
| 3 - 10 - 0190 | 190 | 202 | 120 | 0,9 | 0,02 |
| 3 - 10 - 0200 | 200 | 212 | 126 | 1,0 | 0,02 |
| 3 - 10 - 0225 | 225 | 237 | 142 | 1,1 | 0,02 |
| 3 - 10 - 0230 | 230 | 242 | 145 | 1,2 | 0,02 |
| 3 - 10 - 0250 | 250 | 262 | 158 | 1,2 | 0,01 |
| 3 - 10 - 0280 | 280 | 292 | 177 | 1,4 | 0,01 |
| 3 - 10 - 0300 | 300 | 312 | 189 | 1,5 | 0,01 |
| 3 - 10 - 0315 | 315 | 327 | 199 | 1,5 | 0,01 |
| 3 - 10 - 0320 | 320 | 332 | 202 | 1,6 | 0,01 |
| 3 - 10 - 0350 | 350 | 362 | 221 | 1,7 | 0,01 |
| 3 - 10 - 0355 | 355 | 367 | 224 | 1,7 | 0,01 |
| 3 - 10 - 0400 | 400 | 412 | 252 | 1,9 | 0,005 |
| 3 - 10 - 0450 | 450 | 462 | 284 | 2,2 | 0,005 |
| 3 - 10 - 0470 | 470 | 482 | 296 | 2,3 | 0,005 |
| 3 - 10 - 0500 | 500 | 512 | 315 | 2,4 | 0,005 |
| 3 - 10 - 0560 | 560 | 572 | 352 | 2,6 | 0,005 |
| 3 - 10 - 0600 | 600 | 612 | 378 | 2,7 | 0,005 |
| 3 - 10 - 0700 | 700 | 712 | 441 | 3,1 | 0,001 |
| 3 - 10 - 0800 | 800 | 812 | 504 | 3,6 | 0,001 |
| 3 - 10 - 0900 | 900 | 912 | 567 | 4,1 | 0,001 |
| 3 - 10 - 1000 | 1 000 | 1012 | 630 | 4,7 | 0,001 |
| 3 - 10 - 1100 | 1100 | 1112 | 693 | 5,9 | 0,001 |
| 5 - 10 - 1150 | 1150 | 1162 | 725 | 6,2 | 0,001 |
Tolerance for the parameters contained in this catalog except diameters is 5%. All parameters apply for room temperature. To discharge static electricity, ground the spiral. The TPE layer is standardly placed from the inside of the hose. It is possible to make a hose with a non‑standard diameter (not included in the basic offer) on a special request. It is possible to make a KLIN hose whether with galvanized spiral or stainless steel spiral for a special request. The standard lengths of the hoses are measured while maximum extension.
New comment